Wiring Guide To Setup TimeTec BLE-2 With FingerTec Controller.

Monday, August 27, 2018 TimeTec 2 Comments

Introduction
Introducing TimeTec latest product: TimeTec BLE-2 Smart Door Controller which is a new technology for access door controller that brings convenience in unlocking doors as well as enhancing security.


TimeTec BLE-2 uses Bluetooth Low Energy (BLE) technology that allows users to access doors through smartphone via TimeTec Security App. In this Application, the system provides you with up to four choices of unlocking your doors which are Tap, Voice, QR Code, and Auto-Unlock.

In this guide, we will show you the wiring required to setup TimeTec BLE-2 with the current existing FingerTec devices. This is particularly handy for customers that are still using FingerTec products and would like to try out our latest Door Controller along with the Smartphone App function.

Wiring Installation: -
1) NO – COMM
Normally, this wiring connection is used on FingerTec devices, i.e. Adaptec AC door controller. This connection operates like a push button connection. Therefore, when users proceed to carry out verification on the device, the NO - COMM point will be triggered and send the dry contact signal to the IN 1 and 0V Aux Input at TimeTec BLE-2.

Note that this wiring connection can also be used with FingerTec latest readers with door access function. As such, you will need to follow the wiring diagram as shown in the picture below.
 

 



Once completed the setup, users can not only unlock doors via Fingerprint verification but also with their smartphones using TimeTec Security (Tap, Voice, QR Code, Auto-Unlock). Additionally, this wiring can also be used in installing Adaptec Plus and Adaptec X Controller; for users who decided to replace Adaptec with the new generation of door controller.

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.