Installation Guide of Face ID 4d (FMM) With AdapTec Plus

Tuesday, February 22, 2022 TimeTec 1 Comments



Introduction
FingerTec Face ID 4D is now supplied with a new version of the coreboard (FMM) that comes with new hardware parts and new exterior parts. To ensure the reader connects with secured wiring, we suggest using the AdapTec Plus connection. Using AdapTec Plus can easily prevent someone from breaking into the premise.

Requirements
·         Face ID 4D
·         AdapTec Plus
·         Contactless exit button
 
Wiring diagram

Setup External Siren
Requirements
·         External siren 12VDC
·         Power Supply AdapTec Plus
·         Face ID 4D reader
·         Switch (siren mute)

Wiring diagram

-          Follow the diagram above for a wiring connection to install an external siren.
Please also make sure to connect the siren mute switch to stop the external siren.
-          If you are using a 240vac external siren. You need to add relay connect with NO/COM from the device.

 How to Setup Siren from Device
·         Go to Main Menu – Select Personalize – go to Bell Schedules – choose Options – click External Bell Relay – tick on NC2
·         Please make sure if you set Bell Schedule, don’t forget to change Repeat = ‘Never’ to the day you want to set the Schedule Bell.
 
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.



1 comment:

Have any questions or inquiries about FingerTec? Drop your input here.

Subscribe to: Post Comments (Atom)